For Better Performance Please Use Chrome or Firefox Web Browser

Publications

Conference Papers
sort descending
سیدعبدالرحیم آتشی پور، حمیدرضا میردامادی، رسول امیرفتاحی، سعید ضیایی راد نظارت بلادرنگ بر سلامتی تیر فولادی ضخیم با استفاده از امواج هدایت شده فرا صوت به کمک تبدیل موجک: یک مطالعه آزمایشگاهی December 1390
حشمت اله محمدخانلو، مصطفی غیور، سعید ضیایی راد بررسی تاثیر ارتعاشات پیچشی بر رفتار آشوبناک و وقوع تماس بین روتور و استاتور در ماشین آلات دوار December 1390
Ziaei Rad, S. and Ewins, D. J. Measuring RDOFs using Laser Doppler Vibrometer January 2000
Ziaei Rad, S. and Ewins, D. J. Measurement of Structural Sensitivity with RDOFs and Relative importance of TDOF and RDOF amplitudes January 2000
Ziaei Rad, S. , Hadavinia, H., A.J. Kinloch The Modal Analysis of Cracked Tapered Double-Cantilever Beam (TDCB) Bonded Joints July 2001
Ziaei Rad, S. and Emami, M. D. Design Optimisation In Fluid-Solid Interaction of Aeroelastic Problems May 2002
Ziaei Rad, S. Chaotic Behavior of Mechanical Systems with Backlash February 2002
Pishevar, A.R., Ziaei-Rad, S. Wing Planform Design Optimization Using Genetic Algorithm February 2002
Ziaei Rad, S. and Ewins, D. J. Finite Element Model Updating of Rotating Structures Using Adaptive Simulated Annealing September 2002
Ziaei-Rad, S., Pishevar, A.R. Wing Planform Design Using Stochastic Optimization Techniques May 2003
S. Ziaei-Rad, M.D. Emami, M. Ziaei-Rad Design Optimization of Supersonic Diffuser Using Genetic Algorithm January 2004
Ziaei-Rad, S., Emami, M.D., Ziaei-Rad, M. Design Optimisation Of Supersonic Diffusers Using Adaptive Simulated Annealing May 2004
M. D. Emami, S. Ziaei Rad, H. Afshin Application of the Multi-mixture Fraction Model in Numerical Simulation of Combustion May 2004
Mashayekhi, S. Ziaei Rad, J. Parvizian, K. Nikbin, H. Hadavinia Influence of Triaxial Stress State on Damage Evolution in Solids May 2005
S. Ziaei-Rad, M. Jafari Balancing of Flexible Rotors without Trial Runs Using a Real-Code Genetic Algorithm May 2005
S. Ziaei-Rad, M. Jafari Free Vibration and Unbalance Response Analysis of Helicopter Tail-Rotor-Drive Shaft May 2005
K. Hassanpour, S. Ziaei Rad Finite Element Modelling of Polypropylene Foam Under Impact Loading May 2005
S. Ziaei-Rad, M. Silani Drop Impact Analysis of TV Model and the Effect of Some Design Parameters on Its Electronic Components May 2005
M. Salehi, S. Ziaei Rad Nonlinear Vibration System Identification via the Hilbert Transform May 2006
M. Ajoodanian, S. Ziaei-Rad, A. Abdoolahi, H. Ostadi, Singularity Analysis of 3-DOF 4-Legged Parallel Manipulator with a Non-Slippery Passive Constraining Leg May 2006
S. Adibi, S. Ziaei-Rad, F. Karimzadeh Finite Element modeling of carbon-nanotubes based composites May 2006
M. Jafari, N. Hosseini, S. Aadibi, S. Ziaei Rad, F. Karimzadeh Mechanical Properties Evaluation of Single-Walled Carbon Nanotubes Using Molecular-Dynamics Based Finite Element Approach December 2006
S. Ziaei-Rad, A. R. Ariaei Vibration Analysis of Timoshenko Beams Subjected to a Moving Mass and Spring System May 2006
S. Ziaei-Rad, M. Silani, , N. Nourbakhshnia Finite Element modelling of stress relief vibratory process May 2006
R. Oftadeh , H. Javadi , S. Ziaei-Rad , M. Palhang , A. Sabbaghpour Fard Fabrication of a biped robot and Optimization of its Kinematics Trajectories Based on Relative Coordinates and Bezier Splines May 2007
K. Hasanpour, S. Ziaei-Rad Finite Stain Viscoelastic-plastic Deformation of Polymers Using Finite Element Simulation July 2007
S. Malek, R. Akbari, S. Ziaei-Rad Estimation of Elastomeric Bridge Shear Modulus using Operational Modal Analysis May 2007
S. Maalek, R.Akbari, S. Ziaei-Rad Operational Modal Analysis (OMA) and its applications to experimental vibration analysis of civil engineering structures October 2007
K. Hasanpour, S. Ziaei-Rad Finite Element Modeling of Strain-Stiffening in Biaxial Hot Drawing Process of Poly (Ethylene Tetreohthlate) September 2007
M. Silani, S. Ziaei-Rad Forced responses and free vibration analysis of rotating systems with one and multi open cracks August 2007
S. Adibi, S. Ziaei Rad, F. Karimzadeh Modelling Considerations and Material Properties Evaluation in Analysis of Polymer Carbon-Nanotubes by Using Square Representative Volume Elements February 2007
S. Maalek, R. Akbari, S. Ziaei-Rad Operational modal analysis of a post-tensioned concrete skew bridge before and after replacement of its elastomeric bearings October 2007
S. Rahmanian, J. Kadkhodapour, S. Ziaei-Rad, A. Kermanpur Thermo-mechanical Analysis and Microstructural Evolution in Hot Strip Rolling September 2007
S. Ziaei-Rad, R. Tikani Forced Vibration of Mindlin-Reissner Thick Plate with Layers of Piezoelectric Sensors and Actuators August 2007
S. Rahmanian, J. Kadkhodapour, S. Ziaei-Rad, A. Kermanpur Thermo-mechanical Analysis and Microstructural Evolution in Hot Strip Rolling September 2007
S. Ziaei-Rad, R. Tikani Vibration Analysis of Thick Plate with Integrated Piezoelectric Patches using finite element method May 2007
A. Kermanpur, H. Sepehri-Amin, S. Ziaei-Rad, N. Nourbakhshnia, M. Mosadaghfar Failure characterization of Ti6Al4V gas turbine compressor blades June 2007
J. Kadkhodapour, K. Hassanpour, S. Ziaei-Rad, F. Karimzadeh Finite Element Analysis of Tensile Mechanical Properties in Nanocrystaline Materials April 2007
M. Mashayekhi, S. Ziaei-Rad, J. Parvizian, H. Hadavinia Evaluation of Fracture in a Three Stage Forging Process Using Continuum Damage Mechanics July 2007
M. Olfatnia, M. Salimi, S. Ziaei-Rad Further Investigation on Chatter Analysis in cold rolling mills for Finding Optimum Range of Design January 2007
A. Ariaei, S. Ziaei-Rad, M. Ghayour Critical velocities for beams subjected to moving constant loads October 2008
A. Ariaei, S. Ziaei-Rad, M. Ghayour Comparison between DET and FEM in vibration analysis of beams subjected to moving loads May 2008
M. Rahimi, S. Ziaei-Rad Worst Specification for Force Vibration Response of Mistuned Bladed Disk May 2008
M. Silani, S. Ziaei-Rad, M. Jamshidian Rotor crack detection using pattern search and genetic algorithm October 2008
M. Ghayour, S. Ziaei-Rad, R. Talebitooti, M. Talebitoooti Dynamic Analysis and Critical Speed of Pressurized Rotating Composite Laminated Conical Shells Using Generalized Quadrature Method May 2009
M. Talebitooti, R. Talebitoooti M. Ghayour, S. Ziaei-Rad Free Vibration of Rotating Composite Conical Shells with Stringer and Ring Stiffeners May 2009
J. Kadkhodapour, A. Butz, A. Prakash, S. Ziaei-Rad Finite element modeling of Martensite grain size effect on localized deformation in dual phase steels January 2009
Ali Vahedi, Bohayra Mortazavi, S. Ziaei-Rad A New Multiscale Method for Prediction of Elastic Properties of Bucky Paper in Polymer Nanocomposites January 2009
A. Vahedi, B. Hamidi, M. Kamalvand, M. Madhkhan1, M.A.Vaziri, S. Ziaei-Rad Manufacturing of Large Size Nanocomposite Buckypaper Using Vacuum Filtration Technique December 2009
M. Kamalvand, M. Madhkhan, B. Hamidi , A. Vahedi, M. A. Vaziri, S. Ziaei-Rad The Effect of Filter Type, Concentration and Type of Carbon Nanotube on the Buckypaper Surface Quality December 2009
N. Nouri, S. Ziaei-Rad, A. Vahedi Mechanical Properties Evaluation of Carbon Nanotube Sheets March 2010
H. Salehi, S. Ziaei-Rad, M.R. Zakerzadeh, M.A.Vaziri Zanjani Smart beam defection behaviour due to two or more SMA wires attachment July 2010
H. Talebi Mazraehshahi, H. Zamani, S. Ziaei.Rad An experimental investigation on mechanical properties of basalt composites fabric June 2010
R. Tikani, N. Vahdati, S. Ziaei-Rad Effective Reduction of Peak Frequency in Hydraulic Engine Mounts October 2010
B. Mortazavi, A. Vahedi, S. Ziaei-Rad, N. Nouri Hybrid Finite Element-Neural Network Method for Prediction of Bucky Paper Elastic Properties March 2010
R. Tikani, S. Ziaei-Rad, N. Vahdati, S. Heidari, M. Esfahanian A Novel Double-Notch Passive Hydraulic Mount Design August 2010
M.M. Zaeri, S. Ziaei-Rad, F. Karimzadeh Mechanical Modeling of Carbon Nanotubes March 2010
R. Tikani, N. Vahdati, S. Ziaei-Rad, M. Esfahanian A New Approach for Double-Notch Frequency Hydraulic Mounts June 2010
A. Abazari, S. Ziaei-Rad, H. Dalayeli Investigation on Ship Collision Phenomena By Analytical And Finite Element Methods August 2011
M. Hassanalian, M. Radmanesh, S. Ziaei-Rad Sending instructions and receiving the data from MAVs using telecommunication networks July 2012
Rotordynamic Analysis of a Small Rotor Bearing System December 2014
Evaluation of Dynamic Behavior of a Rotor-Bearing System in Operating Conditions October 2014
Theoretical analysis and experimental verification for sizing of flapping wing micro air vehicles January 2016
M. Hassanalian, A. Abdelkefi, M. Wei, S. Ziaei-Rad Sending instructions and receiving the data from MAVs using telecommunication networks January 2016
On The Finite Element Modeling Of Turbo Machinery Rotors In Rotor Dynamic Analysis May 2018
Journal Papers
sort descending
On the Accuracy Required of Experimental Data for Finite Element Model Updating September 1996
A Modified Eigenstructure Assignment Technique for Finite Element Model Updating February 1996
On the Use of Regularisation Techniques for Finite Element Model Updating October 1999
Aerodynamic Design Optimisation Using Genetic Algorithm September 2003
Design and Development of a comprehensive Omni Directional Soccer Player Robot September 2004
Thermal and Flow Analysis of a Resin Transfer Molded Composite Cylinder Summer 2004
Finite element, modal testing and modal analysis of a radial flow impeller April 2005
Finite Element Model Updating of Rotating Structures Using Different Optimization Techniques December 2005
Numerical Analysis of Damage Evolution in Ductile Solids January 2005
Inverse Design of Supersonic Diffuser with Flexible Walls Using a Genetic Algorithm May 2006
Identification and Validation of a Ductile Damage Model for A533 Steel July 2006
Ductile crack growth based on damage criterion: Experimental and numerical studies July 2007
Ground Vibration Test (GVT) and Correlation Analysis of an Aircraft Structure Model February 2007
Vibration analysis of Timoshenko beams under uniform partially distributed moving masses December 2007
An Investigation on Failure Analysis of Titanium Gas Turbine Compressor Blades October 2007
Damage growth of ductile materials under 3D stress conditions: Numerical and Experimental Summer 2007
Modelling Considerations and Material Properties Evaluation in Analysis of Carbon Nano-Tubes Composite August 2007
Ductile Damage Evolution under Triaxial Stress Conditions: Computational and Experimental Evaluations January 2007
Numerical and experimental investigation on coupled bending-bending-torsion vibration of helicopter blades with initial twist angle September 2007
The effects of the repair operations and replacement of the elastomeric bearings on the modal characteristics of a highway bridge September 2008
Finite Element Simulation of Polymer Behaviors Using a Three-Dimensional, Finite Deformation Constitutive Model August 2008
Finite element modelling of foam-filled tapered thin-walled rectangular tubes under oblique impact loading September 2008
Parametric Study and Numerical Analysis of Empty and Foam-Filled Thin-walled Tubes under Static and Dynamic Loadings June 2008
Influences of operational parameters on chatter vibration of cold rolling machines using finite element method September 2008
Failure Analysis of Ti6Al4V Gas Turbine Compressor Blades December 2008
Investigation into sources of chatter and vibrations in cold rolling mills September 2008
Numerical Simulation and Experimental Investigation of the Failure of a Gas Turbine Compressor Blade July 2008
Dynamic assessment of bridges and beams by using a proprietary designed hammer Spring 2008
A Practical Approach to Control and Self-Localization of an Omni-Directional Mobile Robot May 2008
A large deformation framework for compressible viscoelastic materials: Constitutive equations and finite element implementation June 2009
An experimental and numerical investigation on damping capacity of nanocomposite May 2009
Non-linear non-planar vibrations of geometrically imperfect inextensional beams, Part I: Equations of motion and experimental validation March 2009
Nonlinear electrostatic behavior for two elastic parallel fixed–fixed and cantilever microbeams September 2009
Non-linear non-planar vibrations of geometrically imperfect inextensional beams. Part II—Bifurcation analysis under base excitations March 2009
Dynamic Analysis of Small Pigs in Space Pipelines March 2009
Influence of the tip mass and position on the AFM cantilever dynamics: Coupling between bending, torsion and flexural modes August 2009
Vibration analysis of beams with open and breathing cracks subjected to moving masses October 2009
Finite-element modelling of rate dependent mechanical properties in nanocrystalline materials June 2009
Dynamic bifurcation and sensitivity analysis of non-linear non-planar vibrations of geometrically imperfect cantilevered beams March 2010
Free vibrations of rotating composite conical shells with stringer and ring stiffeners March 2010
Vibration Analysis of Tapered Rotating Composite Beams Using the Hierarchical Finite Element November 2010
Finite Element Modeling of Damping Capacity in Nanocrystalline Materials September 2010
Thermoelastic modeling of rotor response during shaft/seal rub November 2010
Dynamic Analysis and Critical Speed of Pressurized Rotating Composite Laminated Conical Shells Using Generalized Differential Quadrature Method March 2010
Finite Element Simulation of a Yarn Pullout Test for Plain Woven Fabrics June 2010
Numerical simulation of rough rice drying in a deep-bed dryer using non-equilibrium model February 2010
Bird Impact Effects on Different Types of Aircraft Bubble Windows Using Numerical and Experimental Methods February 2010
Mechanical Properties Evaluation of Carbon Nanotube Sheets December 2010
The mechanical modelling of carbon nanomaterials from nanotubes to buckypaper November 2010
Repair of a cracked Timoshenko beam subjected to a moving mass using piezoelectric patches August 2010
Uncertainty treatment in forced response calculation of mistuned bladed disk April 2010
Simulation of Chatter in Cold Rolling Strip using Finite Element Method Summer 2010
A Structural Damage Detection Technique Based on Measured Frequency Response Functions May 2010
Transverse vibration of a multiple-Timoshenko beam system with intermediate elastic connections due to a moving load March 2011
Mechanisms of void formation during tensile testing in a commercial, dual-phase steel April 2011
A Frequency Response Based Structural Damage Localization Method Using Proper Orthogonal Decomposition June 2011
Simulation of the dynamic behavior of a new magnetorheological engine mount for automotive applications Summer 2011
A numerical study on the damping capacity of metal matrix nanocomposites January 2011
The Effect of Filter Type, Concentration, and Type of Carbon Nanotube on the Buckypaper Surface Quality February 2011
Effect of nonlinearity on frequency responses of mistuned bladed disk Winter 2011
Chaotic vibration analysis of rotating, flexible, continuous shaft-disk system with a rub-impact between the disk and the stator January 2011
Experimental and numerical study on geometrically necessary dislocations (GND) and non-homogeneous mechanical properties of the ferrite phase in dual phase steels June 2011
Effect of Foam Core on the Integrity of Tailplane Leading Edge during Bird Strike Event November 2011
A lumped parameter model for disk brake squeal and its suppression through use of dither signals September 2011
A New Hydraulic Engine Mount Design without the Peak Frequency October 2011
Rollover Simulation and Required Structural Modification of O457 Bus Winter 2011
Effect of Different Parameters on Break Squeal Summer 2011
An Improved Model for Fiber Kinking Analysis of Unidirectional Laminated Composites June 2011
Effect of Impact Orientation on Bird Strike Analysis Fall 2011
An Evolutionary Search Technique to Determine Natural Frequencies and Mode Shapes of Composite Timoshenko Beams April 2011
Compression failure and fiber-kinking modelling of laminated composites March 2011
A Molecular Dynamics Investigation on Mechanical Properties of Cross-Linked Polymer Networks June 2011
Comparison of numerical methods in perpendicular and inclined bird strike events September 2011
Sensitivity Analysis on Dynamic Responses of Geometrically Imperfect Base Excited Cantilevered Beams March 2011
A micro mechanical study on failure initiation of dual phase steels under tension using single crystal plasticity model July 2011
A non Model-based Damage Detection Technique Using Dynamically Measured Flexibility Matrix March 2011
Maximum Response of mistuned bladed disk using genetic algorithm and neural network Fall 2011
Bearings coefficients effects on chaotic and bifurcation behavior of flexible rotor systems subjected to rub-impact June 2012
Synthesis, Characterization and Bioactivity Evaluation of Porous Barium Titanate With Nanostructured Hydroxyapatite Coating for Biomedical Application June 2012
Effect of added tip mass on the nonlinear flapwise and chordwise vibration of cantilever composite beam under base excitation March 2012
Crash Test Simulation and Structure Improvement of IKCO 2624 Truck According to ECE-R29 Regulation July 2012
The effect of vacancy defects and temperature on fundamental frequency of single walled carbon nanotubes October 2012
Effect of Bird Geometry and Orientation on Bird-Target Impact Analysis using SPH Method April 2012
Mechanical property evaluation of buckypaper/epoxy composites using molecular dynamics simulations fully implemented on graphical processing units December 2012
Investigation of Material Model, Equation of State and Mesh density on Numerical Simulation of Bird Strike Spring 2012
Effective Reduction of Stiffness at Peak Frequency in Hydraulic Engine Mounts by Using Magneto-Rheological Fluids June 2012
A numerical study on mechanical performance of asphalt mixture using a meso-scale finite element model September 2012
Numerical and experimental investigations on mechanical behavior of composite corrugated core June 2012
Optimum Preform Design in Close Die Hot Forging October 2012
Disk Position Nonlinearity Effects on the Chaotic Behavior of Rotating Flexible Shaft-Disk Systems September 2012
On the Coupling of a Commercial Finite Element Package with LAMMPS for Multiscale Modeling of Materials October 2012
On the experimental and numerical investigation of clay/epoxy nanocomposites November 2012
An Investigation on Mechanical Behavior of Barium Titanate Foam with Hydroxyapatite May 2012
Fabrication and Mechanical property Prediction of Carbon Nanotube Reinforced Aluminium Nanocomposites February 2012
Two-mode operation engine mount design for automotive applications June 2012
Dynamic behavior of Jeffcott rotors with an arbitrary slant crack orientation on the shaft February 2012
Application of wavelet transform for damage detection in a thick steel beam based on guided ultrasonic waves December 2013
The worst response of mistuned bladed disk system using neural network and genetic algorithm March 2013
A new bird model and the effect of bird geometry in impacts from various orientations July 2013
Modeling of the plastic deformation of polycrystalline materials in micro and nano level using finite element method February 2013
A frequency response based structural damage localization method using independent component analysis March 2013
An Approach for Simulating Microstructures of Polycrystalline Materials March 2013
Simulation the mechanical behaviour of polycrystalline Fe by using crystal plasticity and Molecular dynamic methods December 2013
A novel method for slant crack detection in rotors based on turning in two directions May 2013
Fabrication, measurements and Mechanical properties evaluation of nanocomposite Al6061-Al2O3 using finite element method Winter 2013
Equivalent models of composite corrugated cores with elastomeric coatings for morphing structures October 2013
Thermal response and stability characteristics of bistable composite laminates by considering temperature dependent material properties and resin layers February 2013
Vibration Analysis of Rotating Systems with Open and Breathing Cracks December 2013
Micromechanical modelling of damage behaviour of Ti–6Al–4V March 2013
An effective damage identification approach in thick steel beams based on guided ultrasonic waves for structural health monitoring applications March 2013
Simulation of All-steel CNG Cylinders Fracture in an Impact by Damage Mechanic Approach March 2013
Vibration suppression of a symmetrically cantilever composite beam using internal resonance under chordwise base excitation January 2013
Microstructure Modelling of Dual-Phase Steel Using SEM Micrographs and Voronoi Polycrystal Models June 2013
A numerical 2D simulation of part motion in vibratory bowl feeders by discrete element method June 2013
The Effect of Piezoelectricity on the Mineralization of Calcium Phosphate in Piezoelectric Biomaterials January 2013
The effects of lateral-torsional coupling on the nonlinear dynamic behavior of a rotating continuous flexible shaft-disk system with rub-impact June 2013
Vibration Modeling and Modification of Cutting Platform in a Harvest Combine by Means of Operational Modal Analysis (OMA) December 2013
Dynamic response of a multi-span Timoshenko beam with internal and external flexible constraints subject to a moving mass September 2013
Experimental and Analytical Study on Fiber-Kinking Failure Mode of Laminated Composites May 2014
Performance of piezoelectrically actuated micropump with different driving voltage shapes and frequencies February 2014
Stochastic Modelling of Clay/Epoxy Nanocomposites December 2014
Dynamic analysis of a high speed rotor-bearing system July 2014
A semi-concurrent multiscale approach for modeling damage in nanocomposites December 2014
Elastic properties of carbon nanoscrolls May 2014
Design and Modeling of an Active Hydraulic Engine Mount Using FXLMS Algorithm for Automotive Applications October 2014
The Mechanical Behavior of Composite Corrugated Core Coated with elastomer for Morphing Skins June 2014
A Dislocation Density-Based Model for Analyzing Mechanical Behavior of Dual-Phase Steels June 2014
Effect of solid distribution on elastic properties of open-cell cellular solids using numerical and experimental methods September 2014
Chaotic Response and Bifurcation Analysis of a Timoshenko Beam with Backlash Support Subjected to Moving Masses June 2014
Dual-Rotation Speed Friction Stir Welding: Experimentation and Modeling September 2014
Vibrational Power Flow Analysis of a Cylindrical Shell Using Four-Point Technique June 2014
A New Bird Model for Simulating Bird Strike on Various Lay-ups Used in Transparent Components of Rotorcrafts January 2014
Bird strike analysis on a typical helicopter windshield with different lay-ups April 2014
Simulation and Experimental Evaluation of a Magneto-Rheological Hydraulic Engine Mount June 2014
Temperature-Curvature Relationships in Asymmetric Angle Ply Laminates by Considering the Effects of Resin Layers and Temperature Dependency of Material Properties April 2014
Prediction of All-Steel CNG Cylinders Fracture in Impact by Using Damage Mechanics Approach Fall 2014
Vibration analysis of a beam with moving support subjected to a moving mass travelling with constant and variable speed May 2015
Experimental and theoretical studies on piezoelectric energy harvesting from low-frequency ambient random vibrations April 2015
Experimental and Finite Element Simulation of Wear in Nanostructured NiAl Coating October 2015
Formation and coalescence of strain localized regions in ferrite phase of DP600 steels under uniaxial tensile deformation January 2015
A review on design of bladed disk systems September 2015
Nonlinear coupled longitudinal–transverse vibration analysis of a beam subjected to a moving mass traveling with variable speed June 2015
Vibro-acoustic optimization of submerged stiffened plate June 2015
An equivalent model for trapezoidal corrugated cores based on homogenization method May 2015
Dynamic responses of cross-ply bi-stable composite laminates with piezoelectric layers October 2015
Effect of microstructure pattern on the strain localization in DP600 steels analyzed using combined in-situ experimental test and numerical simulation June 2015
Control of Nonlinear Vibration in Bi-Stable Composite Plates using Fuzzy Logic January 2015
A three dimensional extended Arlequin method for dynamic fracture January 2015
Elastic behavior of carbon nanocoils: A molecular dynamics study November 2015
A technique for calculating particle systems containing rigid and soft parts May 2015
A vibration-based energy harvester suitable for low-frequency, high-amplitude environments: Theoretical and experimental investigations March 2015
Finite Element Analysis on Chattering in Cold Rolling and Comparison With Experimental Results December 2015
Improved Crack Closure Line Position: An Improved Model for Crack Breathing Phenomenon September 2015
Numerical simulation of the fatigue behavior of additive manufactured titanium porous lattice structures November 2015
On the Elastic Constants of Single Walled Carbon Nanotubes November 2015
A Microstructural Finite Element Analysis of TWIP Steel Based on Dislocation Density Model February 2016
Self-Heating Measurements for a Dual-Phase Steel under Ultrasonic Fatigue Loading for stress amplitudes below the conventional fatigue limit June 2016
Study of temperature-curvature relationships in Bi-stable Composite Laminates May 2016
Piezoelectric energy harvesting from bridge vibrations under moving consecutive masses June 2016
Electromechanical behavior of a pendulum-based piezoelectric frequency up-converting energy harvester February 2016
Two-phase vesicles: a study on evolutionary and stationary models September 2016
Increasing the Performance of a Rotary Piezoelectric Frequency Up-Converting Energy Harvester Under Weak Excitations December 2016
An experimental and analytical piezoelectric energy harvesting from a simply supported beam with moving mass July 2016
A new approach to design safe-supported HDD against random excitation by using optimization of rubbers spatial parameters April 2016
A novel methodology for wing sizing of bio-inspired flapping wing micro air vehicles: theory and prototype October 2016
Grain boundary effects on nanoindentation of Fe bicrystal using molecular dynamic August 2016
A modified shape function for calculating stable configurations and natural frequencies of bi-stable [0/90]T composite laminates April 2016
Effects of mistuning on dynamic behavior of nonlinear cyclic systems with lump masses and cubic nonlinearity May 2016
Thermal response of DP600 dual-phase steel under ultrasonic fatigue loading September 2016
Micromechanical analysis of martensite distribution on strain localization in dual phase steels by scanning electron microscopy and crystal plasticity simulation May 2016
Improving the read/write performance of hard disk drives under external excitation sources based on multi-objective optimization September 2016
Vibration analysis of bi-stable composite cross-ply laminates using refined shape functions July 2016
A finite element model for extension and shear modes of piezo-laminated beams based on von Karman's nonlinear displacement-strain relation January 2016
Experimental and theoretical investigations on piezoelectric-based energy harvesting from bridge vibrations under travelling vehicles September 2016
A finite-deformation dislocation density-based crystal viscoplasticity constitutive model for calculating the stored deformation energy May 2017
Optimization of passive control performance for different hard disk drives subjected to shock excitation May 2017
Optimization of spiral-shaped piezoelectric energy harvester using Taguchi method August 2017
Correlation of the high and very high cycle fatigue response of ferrite based steels with strain rate-temperature conditions May 2017
Calorimetric studies and self-heating measurements for a dual-phase steel under ultrasonic fatigue loading April 2017
Operational modal analysis and fatigue life estimation of a chisel plow arm under soil-induced random excitations November 2017
Surface layer and nonlocal parameter effects on the in-phase and out-of-phase natural frequencies of a double-layer piezoelectric nanoplate under thermo-electro-mechanical loadings April 2017
Experimental and numerical vibration analysis of wire rope isolators under quasi-static and dynamic loadings July 2017
Investigation of spontaneous curvature and membrane initial configuration on shape evolution of two-component vesicle April 2017
Molecular Dynamics Investigation of The Elastic Constants and Moduli of Single Walled Carbon Nanotubes June 2017
Constitutive modeling of strain induced grain boundary migration via coupling crystal plasticity and phase-field methods September 2017
Characterization of bi-stable pure and hybrid composite laminates – An experimental investigation of the static and dynamic responses September 2018
On the use of local maximum entropy approximants for Cahn–Hilliard phase-field models in 2D domains and on surfaces December 2018
Mathematical modeling of dynamic behavior of fluid bilayer membranes under the effect of density asymmetry June 2018
Review of studies on Mechanical Performance of Spinal Cord in Traumatic Injuries December 2018
On using a distributed-parameter model for modal analysis of a mistuned bladed disk rotor and extracting the statistical properties of its in-plane natural frequencies September 2018
Effect of size on the dynamic behaviors of atomic force microscopes February 2018
Fast Optimization of Tuned Mass-Spring Arrangement for Reduction of Acoustic Power Radiation of Submerged Ribbed Cylinder November 2018
Energy harvesting from vibration of Timoshenko nanobeam under base excitation considering flexoelectric and elastic strain gradient effects February 2018
Strain hardening and micro-deformation behavior in advanced DP and TRIP steels: EBSD examinations and crystal plasticity simulations September 2018
Investigating the Stored Deformation Energy Distribution in a Polycrystalline Metal using a Dislocation Density-based Crystal Viscoplasticity Theory March 2019
Energy harvesting from moving harmonic and moving continuous mass traversing on a simply supported beam September 2019
A Review of Studies on the Motion of Particles Under the Influence of Acoustic Waves in Microfluidic Systems June 2019
Micromechanical analysis of orientation dependency on deformation behavior in DP steels by dislocation density-based crystal plasticity simulation April 2019
On the fatigue behavior of additive manufactured lattice structures January 2019
A micro mechanical study on DP600 steel under tensile loading using Lemaitre damage model coupled with combined hardening December 2019
Phase field modeling of stressed grain growth: Effect of inclination and misorientation dependence of grain boundary energy April 2019
Effect of Fluid and Size on the Nonlinear Dynamic of Atomic Force Microscope Based on Modified Couple Stress Theory April 2019
Modeling length scale effects on strain induced grain boundary migration via bridging phase field and crystal plasticity methods June 2019
Smart Materials and Structures PAPER • THE FOLLOWING ARTICLE ISOPEN ACCESS Bi-stable hybrid composite laminates containing metallic strips: an experimental and numerical investigation April 2019
Three-Dimensional Finite Element Modeling of Particle Motion under the Influence of Acoustic Radiation Force in Microchannel February 2019
A new three-dimensional dynamic model and experimental validation for motion of a part in a vibratory bowl feeder September 2019
An optimized approach for computing coincidence-site-lattice grain boundary energy January 2019
Instability and critical pulling rate of tethers in tether extension process using a mathematical model February 2020
The effects of wedge geometrical parameters and arrangement on the sound absorption coefficient – A numerical and experimental study June 2020
Static and dynamic analysis of a bistable plate under nonlinear magnetic force December 2020
Thorough knowledge of the wind turbine (WT) dynamics is necessary to efficiently improve its design, operation, and maintenance. Due to the wind turbine's large size, there are difficulties in measuring and excitation of full-scale WTs in general modal te June 2020
Effect of iron bicrystal orientation on mechanical properties and dislocation density using molecular dynamics simulations of nanoindentation September 2020
Experimental and Numerical Study of Static Behavior of Bi-stable Hybrid Composite Laminates Containing Three Metallic Strips in its Middle Layer March 2020
Applying load-sharing method to the sliding contact in the presence of nano-lubricants May 2020
An atomistic perspective into the fracture behaviour of Fe-bicrystal July 2020
Molecular dynamics simulation and experimental investigation of tribological behavior of nanodiamonds in aqueous suspensions December 2020
The effect of surface tension and pulling rate on the dynamic behavior of tether extrusion process using a mathematical model May 2021
Experimental and numerical investigation of energy harvesting from double cantilever beams with internal resonance February 2021
A geometrically exact model for predicting statics and snap-through behaviors of bi-stable composite laminates March 2021
Finite element analysis of coupled phase-field and thermoelasticity equations at large strains for martensitic phase transformations based on implicit and explicit time discretization schemes January 2021
Energy harvesting from nonlinear vibrations of an L-shaped beam using piezoelectric patches February 2021
Energy harvesting from a nonlinear magnet-piezoelectric multi-frequency converter array September 2021
Investigating the multiple scales method based on a new scaling for energy harvesting from a double cantilever beam with internal resonance March 2022
Energy performance enhancement and the role of green-roof in an existing building in Isfahan: adaptive study between code No 19 and ASHRAE 90.2:2018 January 2022
Electro-Magneto wave propagation of nanostructure-nanofluid systems resting on an electromagnetic visco-Pasternak medium October 2022
A finite element study on femoral locking compression plate design using genetic optimization method April 2022
Effect of Heat and Humidity on Wave propagation of the Axially Moving Nanoshells Conveying Magnetic Nanofluid Flow October 2022
A finite element study on femoral locking compression plate design using genetic optimization method April 2022
Hydro–Hygro–Thermo–Magneto–Electro​ elastic wave propagation of axially moving nano-cylindrical shells conveying various magnetic-nano-fluids resting on the electromagnetic-visco-Pasternak medium February 2022
Three-dimensional numerical simulation of particle acoustophoresis: COMSOL implementation and case studies May 2022
Chaotic vibration of atomic force microscopes based on the modified couple stress theory September 2022
Piezoelectric-based energy harvesting from bridge vibrations subjected to moving successive vehicles by functionally graded cantilever beams – Theoretical and experimental investigations December 2022
Frequency response analysis of the bladed disk system with the mistuned in mass and stiffness October 2022
Nonplanar vibration and flutter analysis of vertically spinning cantilevered piezoelectric pipes conveying fluid August 2022
Optimal sensor placement and model updating applied to the operational modal analysis of a nonuniform wind turbine tower April 2022
Stability and thermal characteristic of Bi-Stable Composite Plates in asymmetric angle ply laminates by considering the effects of resin layers and temperature dependency March 2022
Analytical determination of non-local parameter value to investigate the axial buckling of nanoshells affected by the passing nanofluids and their velocities considering various modified cylindrical shell theories November 2022
Bandgap and wave attenuation optimization of tetra-chiral metamaterial using PSO algorithm June 2023
A MICROMECHANICAL STUDY ON DP600 STEEL UNDER EXTREMELY LOW-CYCLE FATIGUE January 2023
An Improved EMD Method Based on Utilizing Certain Inflection Points in the Construction of Envelope Curves August 2023
Energy harvesting of nanofluid-conveying axially moving cylindrical composite nanoshells of integrated CNT and piezoelectric layers with magnetorheological elastomer core under external fluid vortex-induced vibration February 2023
Redesign an aircraft windshield to improve its mechanical resistance against simultaneous bird impacts February 2024
A comprehensive formulation for determining static characteristics of mosaic multi-stable composite laminates under large deformation and large rotation April 2024
Design, modelling and experimental verification of a tunable electromagnetic generator for multi-directional vibration energy harvesting February 2024
Free vibration analysis of graphene reinforced functionally graded nanocomposite plates in contact with quiescent bounded fluids on both sides June 2024
Books
sort descending
Saeed Ziaei-Rad, Mahdi Salehi, "Modal Analysis" January 2004
Saeed Ziaei-Rad; Saeed Nourian "Condition Monitoring and Fault Diagnosis of Rotating Machinery" Winter 2007
Books Chapter
sort descending
Advances in Nanocomposites - Synthesis, Characterization and Industrial Applications April 2011

تحت نظارت وف ایرانی